DAVIS Vantage Pro Quick Reference Manual page 5

ND
2
ND
Press 2 to select the second key function (printed in white type
above each key).
The icon will appear in upper right corner of screen, below the
time and date. After you press another key, the icon will disappear. If
you wish to select another second key function, you must press 2
again.
The icon will also time out and disappear from the screen if you do not
press another key within a few seconds.
F
Whenever you see "Press 2
this booklet, this means to press and release 2
immediately press the other key.
8
SETUP
To enter setup: Press and hold DONE and then press (
DONE to advance or BAR to reverse through these setup messages:
1. RECEIVING FROM. Displays available transmitting stations.
2. ON/OFF. To set reception for one of the available transmitting stations. See "STATION."
3. RETRANSMIT ON/OFF. To retransmit to another wireless console. See "STATION."
4. ENTER TIME. To change the time and date. See "TIME."
5. ENTER LATITUDE. Press ( + ) or (
ND
move between fields. Press 2 & UNITS to change from north to south.
6. ENTER LONGITUDE. Press ( + ) or (
ND
move between fields. Press 2 & UNITS to change from west to east.
7. TIME ZONE. Press ( + ) or ( ) to view time zones. Press 2
of time zone. Press ( + ) or ( ) to change GMT offset.
8. DAYLIGHT SAVINGS AUTO/MANUAL. Press ( + ) or (
9. DAYLIGHT SAVINGS OFF/ON. If daylight savings setting = AUTO, displays the current
status. If daylight savings setting = MANUAL, press ( + ) or (
10. ENTER ELEVATION. To correct barometric pressure. See "BAR."
11. WIND CUP SIZE SMALL/LARGE. Press ( + ) or (
12. RAIN COLLECTOR .01 IN/.2 MM/.1 MM. Press ( + ) or (
13. RAIN SEASON BEGINS. Press ( + ) or (
To exit the setup screen: Press and hold DONE .
6
ICONS
Forecast Icons. See "FORECAST."
Moon Phase. The icons shown below are for the Northern Hemi-
sphere. For the Southern Hemisphere, the orientation is reversed.
New Moon First Quarter
Alarm Bell. Appears when you are setting an alarm. Blinks on
%
and off when an alarm is triggered.
Graph Icon. Appears next to a weather variable when you
press that variable's key. On most screens, indicates that that
variable is being shown on the graph. On the alarm screen, indi-
cates that you are setting an alarm for that variable.
Second Function. Appears when you press 2
select the variable or function printed in white above each key.
Umbrella. Appears when it is currently raining.
4
& ANOTHER KEY " in
ND
ND
and then
) to change the flashing digit. Press ( < ) or ( > ) to
) to change the flashing digit. Press ( < ) or ( > ) to
ND
to enter GMT offset instead
). to change the setting.
) to change the current status.
) to change the setting.
) to change the setting.
) to change the month.
Full Moon Last Quarter
ND
. Used to
If you have a solar radiation sensor, press 2
to display:
Solar Radiation (W/m
ND
Press TEMP to toggle between:
). Press
Outside Temperature (0 F, 0.0 F, 0 C, 0.0 C )
Inside Temperature (0 F, 0.0 F, 0 C, 0.0 C )
Temp 2–8 (0 F, 0.0 F, 0 C, 0.0 C ) if you have one or more Tem-
perature and/or Temperature/Humidity Stations.
Soil Moisture (centibars) & Soil Temperature (0 F, 0.0 F, 0 C, 0.0 C )
if you have a Soil Moisture Station. Continue to press TEMP to dis-
play each soil moisture/temperature pair. Maximum is four pairs.
Press 2
All temperature-related readings (inside and outside temperature, wind
chill, heat index, and dew point) will read in the same unit of measure.
Changing one from F to C (or vice versa) changes all others.
For temperature from Leaf Wetness Station, see "HUM."
Press 2
selected variable:
All temperature-related readings (inside and outside temperature,
wind chill, heat index, and dew point) will read in the same unit of
measure. Changing one from F to C (or vice versa) changes all the
others.
New Moon
All rain and ET readings will read in the same unit of measure (0.00
inches or 0.0 mm).
In the setup screen, press 2
Change from 12- to 24-hour clock and from month/day to day/month.
Change latitude from north to south.
Change longitude from west to east.
Change elevation from feet to meters.
Change wind cup size from small to large.
Change unit of measure for rain collector.
2
)
& UNITS to change unit of measure.
ND
& UNITS to change the unit of measure for a
ND
& UNITS to:
ND
SOLAR
ND
& SOLAR
25
TEMP
27
UNITS
29