Lifetime POWER LIFT 90682 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Sports & Outdoors
  5. POWER LIFT 90682
  6. Assembly instructions manual

Lifetime POWER LIFT 90682 Assembly Instructions Manual

Hide thumbs Also See for POWER LIFT 90682:
Table of Contents

Advertisement

Quick Links

Download this manual
POWER LIFT
BASKETBALL SYSTEM
MODEL #60091
MODEL 90682
BEFORE ASSEMBLY:
• Before you start, decide how you would like to fi ll
your base (sand is recommended, see page 29).
• Assembly should take 2 people about 2-3
hours to complete.
Save this instruction in the event that the manufacturer has
to be contacted for replacement parts.
TOOLS REQUIRED
3/8", 1/2", 9/16", 3/4"
(2)
(1)
(1)
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
™
1/2"
(2)
(1)
1/4"
(1)
(1)
Live Chat: www.lifetime.com
(click on "Ask An Expert" tab)
Video Instructions:
www.youtube.com/lifetimeproducts
ASSEMBLY INSTRUCTIONS
(1)
(1)
3/16"
(1)
(2)
(1)
(375 lb)
For Customer Service in Mainland
Europe and the United Kingdom,
E-mail: cs@lifetimeproducts.eu

TABLE OF CONTENTS

Icon Legend................................2
Notices....................................3
Pole Assembly.............................4
Pole to Base Assembly.................9
Handle Assembly.......................22
Final Assembly..........................27
Warning Sticker........................33
Registration........................34
Warranty................................35
MODEL# AND PRODUCT ID
(you will need both when contacting us)
Model Number: 90682
Product ID:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POWER LIFT 90682 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lifetime POWER LIFT 90682

Summary of Contents for Lifetime POWER LIFT 90682

  • Page 1: Table Of Contents

    1/4” Warning Sticker......33 Registration......34 Warranty........35 (375 lb) MODEL# AND PRODUCT ID QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: (you will need both when contacting us) Model Number: 90682 Call: 1-800-225-3865 For Customer Service in Mainland Live Chat: www.lifetime.com Product ID: Europe and the United Kingdom, (click on “Ask An Expert”...

  • Page 2: Icon Legend

    ICON LEGEND • Indicates special heed should be taken when reading. • Indicates the parts to be used for a section. • Indicates no parts required for a specifi c section. • Indicates the hardware to be used for a section. •...
  • Page 3 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this product without following the instructions carefully.

  • Page 4: Pole Assembly

    POLE ASSEMBLY HARDWARE REQUIRED Hardware Bag ABR (x2) AAF (x2) CMV (x2) ABE (x2) ABB (x2) PARTS REQUIRED Metal Parts Warning Sticker ALH (x1) ALF (x1) ALL (x1) ALE (x1) TOOLS REQUIRED 3/8" Electric Drill Scrap Wood Pencil Measuring Tape...
  • Page 5 No Son mécanisme a été conçu unique aro, el tablero ni los brazos de el sistema y anular la garantía. panneau et de l’anneau. N’accroche au panneau ni aux leviers sous peine et d’annuler la garantie. 4016 www.lifetime.com...
  • Page 6 SECTION 1 (CONTINUED) TOOLS AND HARDWARE REQUIRED • Make sure the holes indicated are on the same side of the Pole assembly as the Pole Bracket. Slide the Top Pole (ALH) onto the Middle Pole (ALF) as shown. ATTENTION: THIS STEP CANNOT BE REVERSED! •...
  • Page 7 SECTION 1 (CONTINUED) TOOLS AND HARDWARE REQUIRED • Slide the Middle Pole (ALF) onto the ATTENTION: THIS STEP CANNOT BE REVERSED! Bottom Pole(ALE) as shown. Make sure • In order to seat the Poles, strike each end of the Pole very the crimped side at the end of the hard fi...
  • Page 8 SECTION 1 (CONTINUED) TOOLS AND HARDWARE REQUIRED CMV (x2) • After the Poles have been seated, insert two #10 x .62” Self-Tapping Screws (CMV) into the back of the Pole as shown. • For ease of installation, chuck the Self-Drilling Screws directly into the drill if your drill (see Figure 1, not available on all drills), or use a 3/8”...

  • Page 9: Pole To Base Assembly

    POLE TO BASE ASSEMBLY HARDWARE REQUIRED Hardware Bag DRZ (x1) AAO (x2) AAE (x2) BTS (x1) ABD (x4) CCL (x2) PARTS REQUIRED Metal Part ” 38” AJD (x1) ALI (x2) Plastic Parts AMU (x2) AJN (x1) AJM (x1) TOOLS REQUIRED CCL-3/16”...
  • Page 10 SECTION 2 (CONTINUED) TOOLS AND HARDWARE REQUIRED • Screw the Base Cap (AJN) onto the Base (AJM) as shown. Rubber Gasket • Make sure the Rubber Gasket is inside the Base Cap. • Position the Pole assembly on the Base (AJM) as shown. Slide the 21 3/4” Axle (AJD) through one of the Wheels (AMU) and into the Base (AJM).
  • Page 11 SECTION 2 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2" (x2) AAE (x2) AAO (x2) ABD (x4) • Attach the fl attened end of the Pole Brace (ALI) to the Base (AJM) with the hardware shown. Only fi nger tighten the hardware. •...
  • Page 12 SECTION 2 (CONTINUED) TOOLS AND HARDWARE REQUIRED 3/16” CCL (x2) DRZ (x1) BTS (x1) 1/2" (x2) • Attach the Pole Braces (ALI) to the Bottom Pole (ALE) with the hardware shown. • Tip the system forward and rest the Pole on the ground. Do not stand the system up until it is fi lled with either sand or water later in the assembly.

  • Page 13: Backboard To Rim Assembly

    BACKBOARD TO RIM ASSEMBLY HARDWARE REQUIRED Hardware Bag EAP (x2) AAQ (x2) ABK (x4) AAV (x2) ADR (x4) AOW (x1) AJW (x2) DFE (x4) ABB (x4) AOU (x1) ABQ (x1) APY (x1) PARTS REQUIRED Metal Parts Plastic Parts DFD (x1) AJI (x1) ALX (x1) AMA (x1)
  • Page 14 SECTION 3 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2” (x2) APY (x1) (Not to scale) EAP (x2) AAQ (x1) ABQ (x1) (Not to scale) • Insert two Carriage Bolts (EAP) through the Rim Pivot Bracket (APY) as shown. • Use the 1/2” socket head from a socket wrench to press one Push Nut (AAQ) onto one end of the Axle (ABQ). •...
  • Page 15 SECTION 3 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2” (x2) AOU (x1) 1/2” AAQ (x1) ABK (x2) • Slide the end of the Axle (ABQ) through the Rim (ALX) and the Rim Pivot Bracket (APY). Press the Push Nut (AAQ) onto the end of the Axle.
  • Page 16 SECTION 3 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2” (x2) AOW (x1) AJW (x2) (Not to scale) (Not to scale) AAV (x2) ABK (x2) • Thread the 5/16” Jam Nuts (AAV) all the way down on the U-Bolt (AOU) as shown. •...
  • Page 17 SECTION 3 (CONTINUED) TOOLS AND HARDWARE REQUIRED 9/16” (x2) ADR (x4) DFE (x4) ABB (x4) • Attach the Rim Cover Plate (AMA) to the Rim with the hardware shown. • Attach the Backboard Brackets (AMY) to the Backboard using the hardware shown.

  • Page 18: Backboard To Pole Assembly

    BACKBOARD TO POLE ASSEMBLY HARDWARE REQUIRED Hardware Bag 7 1/2” 7 1/16” AAD (x2) DFB (x2) AAX (x4) DGA (x2) ABN (x8) PARTS REQUIRED Metal Parts Plastic Part 21 1/8” (53.6 cm) AKC (x2) ALM (x1) 25 7/8” (65.7 cm) AKB (x2) TOOLS REQUIRED 3/4”...

  • Page 19: Parts Identifier

    PARTS IDENTIFIER This page intentionally left blank...
  • Page 20 PARTS IDENTIFIER Metal Part Warning Sticker ALH (x1) ALF (x1) ALE (x1) ALL (x1) DFD (x1) 38” ALI (x2) 25 7/8” (65.7 cm) 21 1/8” (53.6 cm) AKB (x2) AKC (x2) ” AJD (x1) AMY (x2) AMA (x1) ALX (x1) 31”...
  • Page 21 PARTS IDENTIFIER Plastic Parts AKG (x1) AKZ (x1) AKF (x1) AJM (x1) AMN (x1) ALD (x1) AJI (x1) AKI (x1) AKP (x1) AJQ (x1) ALM (x1) AJN (x1) BAA (x1) AMU (x2) BAB (x1) HARDWARE REQUIRED...
  • Page 22 PARTS IDENTIFIER This page intentionally left blank...
  • Page 23 SECTION 4 (CONTINUED) 7 1/2” TOOLS AND HARDWARE REQUIRED 3/4” (x2) AAX (x2) DFB (x2) DGA (x2) ABN (x4) • Finger-tighten the Short Extension Arms (AKC) to the Backboard Brackets with the hardware shown. • If necessary, use a bolt to remove any excess powder coating from the holes in the Backboard Brackets.
  • Page 24 SECTION 4 (CONTINUED) TOOLS AND HARDWARE REQUIRED 3/4” (x2) 7 1/16” AAD (x1) ABN (x2) AAX (x1) • Line up the holes in the Top Pole with the holes in the Lower Extension Arms (AKB) as shown. Secure the Lower Extension Arms to the pole assembly.
  • Page 25 SECTION 4 (CONTINUED) SECTION 4 (CONTINUED) TOOLS AND HARDWARE REQUIRED TOOLS AND HARDWARE REQUIRED 3/4” (x2) 7 1/16” AAD (x1) ABN (x2) AAX (x1) • Secure the Short Extension Arms (AKC) to the Top Pole with the hardware shown. If necessary, use a rubber mallet to tap the bolt into place.

  • Page 26: Handle Assembly

    HANDLE ASSEMBLY HARDWARE REQUIRED Hardware Bag 7 1/16” AAD (x1) CYN (x1) AAX (x2) 1/2” DIH (x1) AAW (x1) ABB (x2) 6 1/2 ” (165 mm) CKT (x1) ABA (x2) AQE (x1) ABM (x2) AKH (x1) PARTS REQUIRED Metal Part Plastic Part AMN (x1) 31”...
  • Page 27 SECTION 5 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2” (x2) 1/4” (x1) DIH (x1) CYN (x1) • Slide the Gas Spring Cover (AKG) onto the Gas Spring (AKF) as shown. • Align the holes in the Gas Spring Cover (AKG) and the Gas Spring (AKF) with the holes in the Pole Bracket (ALL), and attach the Gas Spring assembly to the Pole Bracket with the hardware shown.
  • Page 28 SECTION 5 (CONTINUED) TOOLS AND HARDWARE REQUIRED 9/16” (x2) 6 1/2 ” (165 mm) ABA (x2) ABB (x2) ABM (x2) • Position the Trigger (AMN) inside of the Handle (AKI). Secure the Trigger to the Handle with the hardware shown. Make sure the Nut is fl...
  • Page 29 SECTION 5 (CONTINUED) TOOLS AND HARDWARE REQUIRED 1/2” 3/4” (x2) AQE (x1) AAW(x1) AAX(x1) • Insert the Release Pin (AQE) through the Gas Spring (AKF). Slide the Handle (AKI) under the Gas Spring (AKF) so that the Release Pin (AQE) rests in the channels of the Trigger (AMN). •...
  • Page 30 SECTION 5 (CONTINUED) TOOLS AND HARDWARE REQUIRED 7 1/16” AAD (x1) 3/4” (x2) AAX (x1) CKT (x1) AKH (x1) • Connect the Rear Lifter Arms (ALS) to the inside of the Long Extension Arms (AKB) with the hardware shown. Place a .69”...

  • Page 31: Final Assembly

    FINAL ASSEMBLY HARDWARE REQUIRED Hardware Bag ADP (x10) PARTS REQUIRED Plastic Parts AJQ (x1) AKP (x1) BAA (x1) BAB (x1) AKZ (x1) TOOLS REQUIRED (375lb)/(170kg)
  • Page 32 SECTION 6 (CONTINUED) TOOLS AND HARDWARE REQUIRED ADP (x10) • Remove the plastic fi lm from the Backboard (AJI), and attach the Center Frame Pad (AJQ) to the Backboard in the location shown with the hardware indicated. Make sure that the Center Frame Pad is oriented and centered on the metal piece of the Backboard.
  • Page 33 SECTION 6 (CONTINUED) TOOLS AND HARDWARE REQUIRED (375 lb) 6.3A Two adults are required to complete assembly. To prevent serious injuries, the Pole should be held down by one adult at all times while the Base is being fi lled. OPTION A: FILLING WITH SAND (375 lb of sand required) a.
  • Page 34 SECTION 6 (CONTINUED) TOOLS AND HARDWARE REQUIRED • Attach the Net (AKZ) to the Rim (ALX). • Raise the Backboard until it would not go futher. Use a pencil to mark where the bottom of the Gas Spring Cover (AKG) meets the Gas Spring (AJR).

  • Page 35: Maintenance Instructions

    MAINTENANCE INSTRUCTIONS The life of your basketball system depends on many variables. The climate, exposure to corrosives such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to Pole failure, which may cause property damage or personal injury. Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion.
  • Page 36 NOTES...

  • Page 37: Warning Sticker

    N’accrochez rien au manche, à l’anneau, elevación, ya que esto puede dañar el sistema y anular la garantía. au panneau ni aux leviers sous peine d’endommager l’équipement et d’annuler la garantie. Lifetime Products, Inc., Clearfield, UT 84016 www.lifetime.com 11/23/2015 # 1180194...

  • Page 38: Registration

    . And you can rest assured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes. We invite you to read our privacy policy at www.lifetime.com REGISTER today!
  • Page 39 2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective product. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Page 40 ® ENHANCE YOUR LIFETIME PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS ® To purchase accessories or other Lifetime products, visit us at: www.lifetime.com Or call: 1-800-424-3865 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST www.lifetime.com...

Table of Contents