Delay Start - Miele WSA 023 Active Operating Instructions Manual

With Delay start you can choose when
you want the programme to start. You
can delay the start of the programme by
30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Selecting the Delay start function
Delay start is not possible in the Drain/
Spin and Proofing programmes.
 Select the programme required.

 Touch the  sensor control.
The  symbol lights up brightly and
the first 30 minutes of the Delay start
time appear on the time display.
 Touch the  sensor control re-
peatedly until the required Delay start
time lights up on the time display.
– In the case of settings below 3 hours,
the Delay start time changes in incre-
ments of 30 minutes.
– In the case of settings above 3 hours,
the Delay start time changes in incre-
ments of 1 hour.
Tip: If you press and hold the  sensor
control, the time automatically counts
up to 24 hours.


Starting Delay start
 Touch the  sensor control.
The Delay start process starts and
counts down on the time display.
Changing or cancelling a started

Delay start

If the selected Delay start function has
started, it is no longer possible to
change the time.
 Turn the programme selector to the
 position.
 Turn the programme selector to any
programme.
Rotating bars  ...  ...  are
shown on the time display.
The door lock is released.
 Select a programme and a new Delay
start time.
Delay start
29