Programmable Functions; Opening The Programming Level; Choosing And Selecting A Programmable Function - Miele WSA 023 Active Operating Instructions Manual

Programmable functions

The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
Opening the programming
level
Programming is carried out in 8 steps
(, ,  ... ) using the sensor con-
trols.
Prerequisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
 Touch the  sensor control and
hold it down whilst carrying out
steps  and .
 Close the washing machine door.
Wait until Start/Add laundry lights up
constantly ...
 ... and then release the  sensor
control.
 will light up in the time display.
72
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the  sensor control to select
the other programmable functions
one by one:
Programmable functions

Keypad tone

PIN code
 Indicator switch-off behaviour
 Memory
 Longer pre-wash – Cottons
 Soak duration
 Gentle action
 Temperature reduction
 Water plus

Water plus level
 Maximum rinse level

Suds cooling
 Anti-crease
 Low water pressure
 Confirm the selected programmable
function by touching the  sensor
control.