Aquacal TropiCal T035 Operation Manual page 8

Display
Entry code required
No water flow
Primary Heat Pump
Remote Controlled - by master
(primary) Heat Pump
Remote Controlled - by
external controller
Set to 75° F - Maintaining
Set to 45° F - Cooling
Set to 75° F - Heating
Set to Off
Page - 5
Display
The heat pump has a user lock enabled.
See "Using Entry Code to Access Heat
Pump" on page 9.
No water flow is detected. The filter
pump is off or the heat pump is not
receiving the correct water flow.
Primary heat pump controlling other
connected heat pumps
Heat Pump is set to be controlled by
another connected heat pump.
Heat Pump is set to be controlled by an
external controller.
Maintaining a water temperature set on
the thermostat. In this example, the pool
thermostat has been set to 75° F.
Cooling water to point set on the
thermostat. In this example, the pool
thermostat has been set to 45° F.
Heating water to point set on the
thermostat. In this example, the pool
thermostat has been set to 75° F.
The heat pump has been deactivated
using the "Mode / Enter" button.
Description