Table of Contents
Advertisement
Time-setting options
en
Setting the gas grill on the oven
Open the top cover, if available. Keep the top cover
1.
open for as long as the appliance is in operation.
Turn on the main gas supply to the appliance. Insert
2.
the plug into the socket. Open the oven door.
Insert the three lugs on the protecting plate into the
3.
three notches below the control panel.
Insert the protecting plate with the symbol in such a
way that the lugs lie completely in the notches.
Close the oven door so that it is as close as possible
4.
to the protecting place.
Push in the function selector and turn it clockwise to
5.
the ignition position
Keep the function selector pressed in and turn it to
6.
the grill setting
.
(
Keep the function selector pushed in for 10 seconds so
that the safety pilot starts up.
Check whether the flame continues to light up. If the
7.
flame goes out again, repeat the process from step
5.
Once the food is cooked, switch off the function
8.
selector. Once the oven has cooled down, remove
the protecting plate.
Caution!
The gas grill only works when the protecting plate is
inserted.
Make sure that the protecting plate is correctly inserted.
Do not press the selector for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
20
:
.
OTime-setting options
T i m e - s e t t i n g o p t i o n s
Time-setting option Use
Timer
The timer functions like an egg timer. It runs
Q
independently of the appliance when it is
heating and does not affect the appliance.
Clock time
When the timer is not running in the fore-
v
ground, the appliance will show you the time
of day on the display.
An audible signal sounds once the timer duration has
elapsed.
Setting the timer
You can use the timer regardless of whether the
appliance itself is in use.
The maximum time that can be set is 23 hours 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. The higher the value, the
larger the increments.
The timer duration starts at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
button.
@
Press the
button.
Q
1.
Use the
or
button to set the timer duration.
A
@
2.
After a few seconds, the timer duration will start to
count down.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
or
A
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.
Setting the time
When the appliance is connected to the power supply
or following a power failure, the time flashes in the
display. Set the time.
Press the
button.
v
1.
The time stops flashing.
Use the
or
button to set the time.
A
@
2.
The appliance applies the settings after a few seconds.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, touch and hold the
flashes, and then use the
time.
button and 10 minutes if
A
button to change the timer
v
button until the time
or
button to change the
A
@
Advertisement
Table of Contents
