Table of Contents
Advertisement
Before using for the first time
en
Check through the opening in the oven's bottom
5.
panel that the flame is burning. If the flame goes out
again, repeat the process from step 3.
Close the oven door carefully.
6.
Switch off the function selector after 30 minutes.
7.
Do not press the selector for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
Setting the gas grill on the oven
Open the top cover, if available. Keep the top cover
1.
open for as long as the appliance is in operation.
Turn on the main gas supply to the appliance. Insert
2.
the plug into the socket. Open the oven door.
Insert the three lugs on the protecting plate into the
3.
three notches below the control panel.
Insert the protecting plate with the symbol in such a
way that the lugs lie completely in the notches.
Close the oven door so that it is as close as possible
4.
to the protecting place.
Push in the function selector and turn it clockwise to
5.
the ignition position
Keep the function selector pressed in and turn it to
6.
the grill setting
.
(
Keep the function selector pushed in for 10 seconds so
that the safety pilot starts up.
Check whether the flame continues to light up. If the
7.
flame goes out again, repeat the process from step
5.
Switch off the function selector after 30 minutes.
8.
Once the oven has cooled down, remove the
protecting plate.
Caution!
The gas grill only works when the protecting plate is
inserted.
Make sure that the protecting plate is correctly inserted.
16
.
:
Do not press the selector for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
Advertisement
Table of Contents
