Datamax MP-Nova4 DT User Manual page 23

5. Getting Started
5.3.1 Inserting Media MP Nova4 & 6
7.
Lock the roll guide lock (turn
the handle clockwise). The
roll steering shall guide the
roll, but shall not be tight.
!
Note:
If the roll guide lock cannot be
properly tightened (Note: not too
tight), lift the lock upwards,
rotate it back half a turn, lower it
and retighten.
8.
Fold the handle (the print
head folds automatically
onto the roller).
9.
Press the print button a few
times until the printer
automatically finds the
correct position of the media.
Note:
If necessary, make a test
printout and auto adjust the
media positioning sensor as
described in chapter 5.7.
10.
If you have an:
MP Nova4 or 6 DT: go to
Test Print, chapter 5.7.
MP Nova4 or 6 DT Peel Off:
go to Inserting Media Peel-Off
Kit, chapter 5.4.
MP Nova4 or 6 TT: go to
Inserting Ink Ribbon, chapter
5.5.
MP Nova4 or 6 TT Peel Off:
go to Inserting Media Peel-Off
Kit, chapter 5.4.