Table of Contents
Advertisement
Remove the chuck by turning it counter clockwise.
u
To refit the chuck, screw it onto the spindle.
u
Selecting the drilling mode
For Impact drilling in masonry and concrete, set the
u
drilling mode selector (2) to the
For drilling in steel, wood and plastics or for screw driving
u
set the operating mode selector (2) to the
Switching on and off
To switch the tool on, press the On/off switch (3).
u
For continuous operation, press On/off switch (3) then
u
press the lock-on button (4) and release the On/off switch
(3).
To switch the tool off, release the On/off switch.
u
To switch the tool off when in continuous operation,
press the On/off switch (3) again and release it.
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
q
position.
r
position.
(Original instructions)
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked with this
symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries
according to local provisions.
Further information is available at www.2helpU.com
Technical data
Input voltage
V
AC
Power input
W
No load speed
min
-1
Max. drilling capacity
Concrete
mm
Steel
mm
Wood
mm
Weight
kg
Level of sound pressure according to EN 60745:
Sound pressure (L
) 94,5 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 105,5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
,
) 13,5 m/s
h
D
EC declaration of conformity
MACHINERY DIRECTIVE
BEH201 Impact drill
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with directive 2014/30/EU,
2006/42/EC and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
ENGLISH
BEH201
230V - 50Hz
450
2800
10
6
15
1.4
2
2
, uncertainty (K) 1,5 m/s
5
Advertisement
Table of Contents
