Features And Options - DataCard SP55 Plus Printer Manual
Datacard sp55 plus: printer guide
Hide thumbs
Also See for SP55 Plus:
- Quick install manual (20 pages) ,
- Supplementary manual (2 pages) ,
- Printer manual (134 pages)
Table of Contents
Advertisement
Features and options
Features and options are identified on the printer label.
•
Printers with "U" printing can print one color (monochrome)
only. "C" printing is full-color or monochrome printing.
•
All SP55 printers have a USB connection.
•
SP55 printers can include a duplex module.
•
A magnetic stripe module can be a three-track (IAT) or
single-track (NTT) module. It is visible inside the printer.
•
SP55 Printers can have an 100-card (H1) or 200-card (H2)
Input Hopper. The Input Hopper can have a lock (K1).
•
An optional smart card module can have:
•
Contact coupler (SC1x0 on the label): Visible inside the
printer. Includes a USB port on the printer.
•
Contactless (RF) coupler (SC20x): Includes a serial or
USB port.
•
Combination smart card coupler (SC3xx): Contact and
contactless couplers. Visible inside the printer, includes
USB or serial port. See SP Series Info Central for codes.
•
Contact station (SC400): Visible inside the printer.
Includes a serial port.
Page 4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SP55 Plus and is the answer not in the manual?
Questions and answers
I replaced the ribbon correctly, but when I attempt to print a card, it prints a portion of the top of the front of the card. The printer serial number is: H102552 Firmware version: 33.36
The issue may be caused by the print ribbon spools not being pushed completely onto the cartridge spindles. Push each print ribbon spool onto its spindle until it clicks into place. If the issue continues, contact your service provider.
This answer is automatically generated