Board layout
5.1.2
SAS/SATA backplane
Part number: A3C40070504
You will find the SAS/SATA backplane with 4 slots for SAS or SATA hard disk
modules located on the hard disk cage.
1
1
Connector power supply (X6)
2
2
I
C bus connector (X11)
3
Connector to SAS/SATA controller
(X1)
The LEDs are made visible on the front side of the mounting frames via light
conductors, which are situated at the mounting frames of the drives. The
controlling of the LEDs does only work if a driver has been loaded. The signal
of the LEDs is described in the Operating Manual.
44
2
5
3
4
4
5
6
Service Supplement
SATA LED control connector (X12)
LEDs
SAS/SATA connectors for hard disk
drives
Appendix
6
TX150 S5