Abilica WinTech D12 Manual page 28

FEATURES
Time
Speed
Distance
Calorie
Note: Calorie consumption is an indication only!
Watt
Pulse
Note: Hold the hand pulse with both hands for at least 30 sec.
START-UP
When you enable the display will light up all the symbols for 2 sec. (Figure 1) and
let out a long beep. Then the software version number is displayed (Figure 2)
Figure 1
In U1 til U4 you may input personal data for up to 4 different users. This info will be
used to calculate e.g. calorie consuption and maximum heart rate.
When the computer is reset, all values show 00:00, and all functions will flash
simultaneously at the top of the display. This is called "startup window" (Figure 4)
and is the starting point for all the settings described further herein.
In the startup window, yo may enter data for a fixed work out time, distance or the
like, please enter now. Note that the parameters you enter a value will count
down, while all parameters left at 0 will count up. Training session is terminated
when one of parameters have counted down to 0 You can only select / modify
user profiles when the display is in sleep mode (Figure 4)
after pressing the TOTAL RESET.
a) Shows the time from 00:00 to 99:59
b) Counts down to 0 from the selected time
Displays the speed from 0.00 to 99.9 km.
a) Shows the distance from 00.00 to 99.9 km.
b) Count down to 0.00 from selected distance
a) Displays calories burned from 0 to 999
b) Counts down to 0 from the selected calorie consumption
Shows energy consumption from 10W to 350W.
Note: Can be programmed for manual application.
Shows pulse from 0 to 240 BPM.
Figure 2
Figure 4
28