Operation Instructions Thank you for purchasing the PLN2200 monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
COMMUNIQUE D'AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Class B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle.
Unpacking Instructions Remove the LED LCD Monitor out of the package and take off EPE Foam. Remove stand and base from EPE Foam and attach to base. Adjust the display between -5° and 15°. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your unit.
Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d'entretien recommandés dans ce manuel de l'utilisateur pour maximiser la durée de vie de votre appareil. A faire: Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné d'un nettoyant doux du commerce pour vitres ou d'un mélange à...
First Setup Install the Stand Base Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
Page 9
Disconnecting the Stand Base Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. Press the release button and pull away the monitor to remove the stand from the monitor.
Front View of the Product Menu / Exit Brightness / Down Blue Light Reducer / Up Input select / Enter Power On / Off LED Indicator *Hot keys Instructions please see "Basic Operation" on page10.
Quick Installation Connect either HDMI or VGA Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note the monitor ships with an HDMI cable only. Connect the power cord to a properly grounded AC outlet, then to the monitor. Power-ON computer and then POWER-ON the monitor.
Basic Operation Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front. The power LED indicator light will be blue when the LED LCD Monitor is on.
Page 14
OSD lock out Function When LED LCD Monitor is on and the OSD menu is not activated, the “Lock Out” function can be enabled. Option 1: OSD lock-all 4 buttons are locked except the “POWER” button. Press and hold the button for 5 seconds to lock the OSD buttons.
Page 17
COLOR TEMP COLOR TEMP : Choose color temperature User, Warm, Normal, Cool Under USER, the following colors can be adjusted R: Red 0-100 G : Green 0-100 B : Blue 0-100...
Page 18
OSD SETTING LANGUAGE : Choose language English, French, German, Italian, Spanish, Russian OSD H. POS : Adjust horizontal position of OSD 0~100 OSD V. POS : Adjust vertical position of OSD 0~100 OSD TIMER : Adjust OSD time out 0~60 TRANSPARENCY: Adjust OSD transparency 0~100...
Page 19
RESET IMAGE AUTO ADJUST: Adjust display automatically (Only available in VGA input). RESET : Reset to factory default...
Page 20
MISC SIGNAL SOURCE : Select Input source HDMI, VGA VOLUME : Adjusts volume of earphone 0-100...
Supporting Timing Modes STANDARD RESOLUTION 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA...
Technical Information Panel 21.5" TFT (with LED backlight) Power Management Normal On: 15 Watts (typical), 17 Watts (maximum) Standby Mode: < 0.5Watt Off: < 0.5 Watt Displayable Resolution FHD 1920x1080 max Pixel Dimension 0.2479(H)x0.2479(V)mm Display Color 16.7M Tilt -5° ~ 15° Active Display Area 476.064mm x 267.786mm Temperature...
Wall-Mount Installation Instructions Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the LED LCD Monitor. Line up the holes of the arm with the holes in the back of the monitor. 2.
Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare. Put your LED LCD monitor in a well ventilated area. ...
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting. To speak with Planar Customer Support please have your model and serial number available and dial: Planar Support...