Advertisement
2 Use
2.1 Intended use
The winder will from now on simply be referred to as machine and may only be used for winding the
appropriate products that meet the data as mentioned in the description. In case of doubt, ask the
manufacturer for permission.
Any other use of the machine than the described may result in danger regarding damage to the machine
and/or for the safety of the operator or for those in the proximity of the machine.
Before operating the machine, resolving failures and carrying out maintenance, read the whole manual
with respect to safety.
Before using, storing and installing this machine, you have to at least read chapter 4 installation.
We mainly draw attention to paragraph 1 Safety, which refers to the intended use and to unsafe
situations that could not be avoided in the design and manufacture of the machine.
2.2 Improper use
The machinery may not be used under the following circumstances:
•
In imperfect condition.
•
In an dangerously explosive environment (unless the machine is intended for this).
•
When using unsuitable materials and auxiliaries.
•
Without taking account of the values under "Technical data".
•
In a humid environment.
The following materials may not be processed in the machinery:
•
Dangerously explosive and inflammable materials.
•
Erosive and corrosive materials.
•
Food (unless the machine is intended for this).
2.3 Scope
The machinery is intended for industrial use.
2.4 Residual dangers
Everything was done constructively to protect the user against possible dangers. However, several
residual dangers cannot be avoided. The user must take account of the following:
2-3
Advertisement
