Advertisement
5.6.3.1
Windings parameters
This is an example, reality may differ.
This is the first screen with adjustable parameters per program. This screen includes the following
functions:
Here you enter how many windings you want to have at the underside of a pallet. With
these extra windings the load can be attached to the pallet tighter. The input field left of
the pallet is for the start of the cycle and at the right for the end. The colour of the input
field refers to the part of the pallet to wind.
Here you indicate how many base windings are required on the pallet. These windings
ensure that the base windings are tightly connected with the rest of the pallet. The input
field left of the pallet is for the start of the cycle and at the right for the end. The colour
of the input field refers to the part of the pallet to wind.
Here you indicate how many base windings are required at the top of the pallet. These
windings provide extra stability to the top layer of the pallet. The colour of the input field
refers to the part of the pallet to wind.
This button is the option button between single and spiral winding. The green illuminated
selection is active.
This button is the option button between winding with or without top layer. The green
illuminated selection is active.
This button is the selection button for using or not using the foil puncturer. The green
illuminated selection is active.
This button is for saving the parameters. If it is operated, the changes are filed in the
right program and you return to the ''Program parameters'' menu. (See paragraph 5.6.3)
This is a graphic representation to visualise in which program the changes are saved.
This button is to continue to the next parameter menu.
(See paragraph 5.6.3.2)
5-17
Advertisement
