Advertisement
5.6.3.2
Parameter times
This is an example, reality may differ.
This is the third screen with adjustable parameters per program. This screen includes the following
functions:
Here you indicate the required time for the base windings. This adjustable time is to
determine the height at which you want to make the base windings. The foil carriage will
move up the number of set seconds. The input field left of the pallet is for the start of the
cycle and at the right for the end.
Here you indicate the required time for the overlap. This adjustable time is to determine
how long the foil carriage has to move over the top of the pallet. The foil carriage will
move up the number of set seconds.
This button is for saving the parameters. If it is operated, the changes are filed in the
right program and you return to the ''Program parameters'' menu. (See paragraph 5.6.3)
This is a graphic representation to visualise in which program the changes are saved.
This button is to continue to the previous parameter menu.
(See paragraph 5.6.3.1)
5-18
Advertisement
