Proper use
This foot warmer is intended for applying heat to
the human body. Do not use the foot warmer wear-
ing shoes, as this would reduce your sensitivity to
heat and also soil the foot warmer. This foot warmer
is not intended for use in hospitals or for commercial
use. In particular it must not be used for babies or
infants, persons who are insensitive to heat, helpless
persons, or animals. Any use other than that described
here or modification to the foot warmer is not per-
mitted and could lead to injury and / or damage to
the product. The manufacturer accepts no liability
for any damage caused by improper use.
Description of parts
Teddy lining, removable
1
Control unit
2
Function indicator
3
Included items
Immediately after unpacking, check that all the
items are present and that the product is in perfect
condition.
IMPORTANT INSTRUCTIONS –
KEEP FOR FUTURE REFERENCE!
Important safety
instructions
comply with the following instruc-
tions can cause personal injury or
material damage (electric shock,
Introduction / Important safety instructions
Failure to
1 Foot warmer with removable teddy lining and
control unit
1 Set of operating instructions
Technical data
Model:
Type:
Power supply:
Power input:
Dimensions:
Protection class:
Protection class
(water protection):
Electric field strength:
Magnetic field strength: max. 80 A / m
Magnetic flux density:
Material:
Surface of foot warmer: 100 % polyester
Teddy lining:
Manufacturer:
MGG Elektro GmbH
Steinstraße 27
40210 Düsseldorf, Germany
skin burns, fire). The following ad-
vice on safety and hazards is in-
tended to protect your health and
that of other people as well as to
protect the foot warmer. Please ob-
serve these safety instructions and
make sure that you pass on this
SFW 100 C3
FW 10 S
220–240 V / 50–60 Hz
100 W
approx. 26 x 26 x 30 cm
(W x H x D)
II /
Foot warmer: IP X1,
drip-resistant
Control unit: IP X0, no
moisture protection
max. 5000 V / m
max. 0.1 milli-Tesla
100 % polyester
GB/IE/NI
7