Installation Steps, Overview - Fujitsu PRIMERGY TX2550 M5 Operating Manual

Starting up
5.1

Installation steps, overview

Ê First of all, carefully read the safety instructions in
page 43 and following.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see
Ê Ensure that you have all necessary manuals, see
on page 13; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For installing, see the original component documentation.
Ê Install the server in the rack, see section
page 62.
Ê Connect the devices to the server. To do this, see sections
connecting/disconnecting cables" on page 67
the server" on page
Ê Connect the server to the mains, see section
on page 69.
Ê If applicable, install the HDD/SSD modules, see
modules" on page
Ê If applicable, install a second PSU, see
page 86.
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server, see section
58
"Unpacking the server" on page
68.
82.
"Connectors, controls and indicators" on page
Operating Manual
"Important information" on
60.
"Documentation overview"
"Installing the server in the rack" on
and "Connecting devices to
"Connecting the power cord"
"Installing HDD/SSD
"Installing a second PSU" on
"Notes on
27.
TX2550 M5