Led Indicator Table - Synology DS120j Hardware Installation Manual

LED Indicator Table

LED Indicator
STATUS
Front LAN
DISK
Power
Note: Model specifications are subject to change without notice. Please refer to
1
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the
drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.
11 Chapter 2: Hardware Setup
Color Status
Green Static
Orange Blinking
Off
Static
Green
Blinking
Off
Static
Green
Blinking
Orange Static
Off
Static
Blue
Blinking
Off
www.synology.com
Description
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Network connected
Network active
No network
Drive ready and idle
Accessing drive
Drive error / Port disabled 1
No internal drive / Deep sleep
Powered on
Booting up / Shutting down
Powered off
for the latest information.