Safety Features; System Lock; Flame Failure Monitor; Safety Switch-Off - Miele KM 3034 Operating And Installation Instructions

Safety features

System lock

The system lock is deactivated if
there is an interruption to the power
supply.
The system lock can only be activated
if all the cooking zones are switched
off.
The cooktop is fitted with a system lock
so that the cooking zones cannot be
switched on inadvertently.
If a control knob is turned or a sensor is
touched when the system lock is active,
the indicator light illuminates and 
appears in the minute minder display.
Activating
 Touch the + and - sensors until 
appears in the minute minder display
and a tone sounds.
 will go out after a short while.
Deactivating
 Touch the + and - sensors until 
goes out in the minute minder display
and a tone sounds.
30

Flame failure monitor

The cooktop is equipped with a flame
failure monitor. If a gas flame is
extinguished, e.g. by food boiling over
or by a draught, and re-ignition does
not work, the gas supply is switched
off. This prevents the release of gas. If
you turn the control to the  position,
the burner is ready for use again.

Safety switch-off

If a burner operates for an unusually
long time, it switches itself off
automatically. If you turn the control
knob to the  position, the burner is
ready for use again.