Directed Electronics Matrix 3 Owner's Manual page 22

If programmed for passive arming, a feature called Smart
Relocking will occur when the system is disarmed without
opening a door, so that the doors will automatically lock
when the system passively rearms.
➤ ➤ Arming/disarming confirmation siren chirps
➤ ➤
Auto-Lock/Auto-Unlock
doors will lock three seconds after the ignition is turned on,
and unlock when the ignition is turned off. The system will
prevent the doors from locking when the ignition is turned on
with any door open. If your installer is programming the secu-
rity system with the Directed
and the TechSoft Programmer, ignition lock and unlock are
independent features and can be programmed separately.
➤ ➤ Passive door locking (with passive arming) or
(only when arming with the transmitter). Passive
locking
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
➤ ➤
Panic mode
states have laws against siren capability in a moving vehicle.
➤ ➤
Forced passive arming
programmed for passive arming and the forced passive
arming feature has been programmed on, the system will
passively arm after one hour, even if a protected entry has
been left open. This feature is useful if a door has been left
ajar when leaving the vehicle. Forced passive arming ensures
that the security system will be armed in every situation.
© 2001 directed electronics, inc.
or off: With this feature on, the
on
Bitwriter or a personal computer
®
/disabled with the ignition on: Some
enabled
or off: If your system is
on
or off.
on
active door
19