Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Comedes Demecto 10
Summary of Contents for Comedes Demecto 10
- Page 1 Dehumidifier Demecto 10...
-
Page 2: Table Of Contents
Intended use ....................Operating instructions ................. Technical data .................... Layout ..................... Setting up instructions ................... Starting up ....................Hose drainage .................... Recommendations for drying with the Comedes Demecto 10 ......Maintenance ..................... Frequently asked questions ............... EC declaration of conformity .............. - Page 3 Dear Customer, Thank you for buying the Demecto 10 from Comedes GmbH. You have purchased a powerful dehumidifier, which has been developed in accordance with the latest technical standards. To ensure that your device offers you faithful service for a long time, please study these operating instructions in detail, especially the safety information.
-
Page 4: Safety Information
WARNING: Be sure to read the instructions before using for the first time. Any errors made in following the safety information and instructions may result in an electric shock, fire and/or serious injury. Keep all the safety information and instructions in a safe place for future use. Important: Make sure that the power plug is removed from the socket outlet before opening the device. -
Page 5: Intended Use
If the humidity level increases again, the device switches on again automatically. The device switches off automatically when the water tank is full. Technical data Product name: Comedes Demecto 10 Voltage: 220~240V 50 Hz Power rating: 250W... -
Page 6: Layout
Layout Figure 1: Control panel Air outlet Carry-handle Front cover Figure 2: Air inlet / Back side Opening for hose drainage Water tank Control Panel Figure 3: Tank is not in place or tank is „full“ indicator Operation Timer Defrosting Fan speed... -
Page 7: Setting Up Instructions
The higher the humidity in a room and the higher the temperature in that room, the more effectively the Comedes Demecto 10 can dehumidify the air. The compressor therefore generates heat and warms up the air in the room. This is perfectly normal and is no cause for alarm. - Page 8 Emptying the water tank: When the water tank is full, the Comedes Demecto 10 switches off automatically and the red LED (tank “full” indicator, Fig. 3) will light up. You need to empty the water tank before you can continue using the Demecto 10.
-
Page 9: Hose Drainage
Hose drainage The Comedes Demecto 10 can also be operated with a drainage hose. To do so, remove the water tank and fix a drainage hose Ø12mm (not included). Put the hose into the recess on the tank, insert the tank again and guide the hose into a drain channel. -
Page 10: Recommendations For Drying With The Comedes Demecto 10
In the case of building defects or water damage, the cause needs to be eliminated first. Once this has been done the rooms can be dried using condensation driers such as the Demecto 10. In this case the dehumidifier is run in continuous operation mode. The ambient temperature needs to be at least 20°C (but not above 27°C). -
Page 11: Maintenance
<=20°C are for basement quarters. Maintenance The Comedes Demecto 10 is largely maintenance-free. To maintain the level of dehumidifying efficiency you need to clean the filter at least once a month, or more often if necessary. To do this, switch off the device, pull the power cable and remove the water tank at the back of the device. -
Page 12: Frequently Asked Questions
3. Is the red lamp on? 4. Is the fuse burned out? 5. If the above points are OK, try again in 10 minutes. 6. If the device is still not working, please contact service@comedes.com Inadequate dehumidifying results. 1. Is the dust filter soiled? 2.
Need help?
Do you have a question about the Demecto 10 and is the answer not in the manual?
Questions and answers