Zone 2 ™ Impact Sensor; Remote-Controlled Sensor Bypass; Previous Intrusion Alert; Specific Zone Intrusion Identification - Avital AviStart 6500 Owner's Manual

2
Zone ™ Impact Sensor
2
The Zone Impact Sensor has two individual vibration/impact sensing zones.
Zone #1:
If a less threatening vibration or impact is detected, the siren will issue 2
warn-away chirps. A second violation will also issue 2 warn-away chirps. If
within 45 seconds a third violation is detected, the sensor will automatically
trigger the alarm. The siren will sound and the lights will flash.
Zone #2:
If a more threatening vibration or impact is detected at any time, the siren and
lights will activate instantly.

Remote-Controlled Sensor Bypass

You can bypass the system sensor(s) at any time. The alarm system will still
provide full perimeter protection.
To Bypass the Sensor(s):
1. Press remote SILENT and TRUNK buttons at the same time.
2. The siren will chirp twice...pause...chirp twice...pause...chirp twice.
3. The sensor(s) is now bypassed until you remotely disarm and then re-arm
your system.

Previous Intrusion Alert

If the vehicle had been tampered with and the alarm has been triggered, the
siren will chirp 3 times upon remote disarm instead of the usual 1 chirp.

Specific Zone Intrusion Identification

If the alarm had been triggered in your absence, the siren will chirp 3 times
upon remote disarm (Previous Intrusion Alert). When you enter the vehicle
and turn the ignition "ON," the LED will flash in cycles to specifically identify
which zone triggered the alarm.
LED
1 flash...1 flash...
2 flashes...2 flashes...
3 flashes...3 flashes...
4 flashes...4 flashes...
8
AviStart 6500 Owner's Manual - 110698 Rev. B
Zone
Impact sensor / optional sensor input
Hood trigger
Door trigger
Trunk trigger