Performance Characteristics And Delivery Options; Accessories; Operating Principle - Leuze electronic DDLS 548i Manual

Optical data transmission for 100 mbit/s ethernet - version 200m
Table of Contents

Advertisement

NOTICE
Transmission problems with TCP/IP and UDP protocols!
It is the user's decision whether the DDLS 548i is usable. Leuze electronic GmbH + Co. KG can-
not accept any liability for any transmission problems that occur which are attributable to the
above-mentioned causes.
The following TCP/IP and UDP protocols must be checked individually. The list does not claim to be com-
plete.
• PROFINET Profisafe
• PROFINET IRT
• All safety protocols
• The DDLS 548i cannot be used in EtherCat networks.
3.1.3

Performance characteristics and delivery options

• Status information on the DDLS 548i available in the control
• Protocol-independent data transmission of all TCP/IP and UDP protocols, e.g.
• PROFINET RT
• EthernetIP (Rockwell)
• ... and more
• Data transmission over a range of up to 200 m
• Optional alignment laser including spirit level for mounting support
• Planar surfaces on top and side for supporting a level or alignment straightedge
• Single-handed adjustment (SHA) for aligning the devices by one person
• Optional variants with integrated heating for operating temperatures below -5 °C
Use to ‑35 °C
• Transmission optics with larger beam spread on request
3.1.4

Accessories

For exact details and order information, see chapter 13 "Order guide and accessories".
• Adapter plate for installing instead of a DDLS 200
• Ready-made cable for M12 connections
• Customizable connector plug
3.1.5

Operating principle

A pair of devices is necessary for establishing a data transmission path. To prevent the devices from mutu-
ally interfering with one another during data transmission, they use different frequencies.
• one device with frequency F3
Part designation: DDLS 5XX xxx.3 YY
Designation on the name plate: Frequency F3
• one device with frequency F4
Part designation: DDLS 5XX xxx.4 YY
Designation on the name plate: Frequency F4
NOTICE
Installation for devices with an operating range of 200 m.
Ä Always install the Frequency F4 device as stationary device for devices with an operating
range of 200 m (DDLS 5XX 200...).
Leuze electronic
DDLS 548i
Device description
13

Advertisement

Table of Contents
loading

Table of Contents