Panic Mode (Optional); Valet Mode - Directed Electronics Failsafe 103T Owner's Manual

Panic Mode (optional)

If you are threatened in your vehicle, you can enter Panic Mode to
attract attention. Panic Mode will trigger the system and honk the
horn (if connected) for 30 seconds. The starter kill and state of the
system (armed or disarmed) are not affected by the Panic Mode
trigger sequence.
To enter Panic Mode:
1. Press .
2. Press (labeled PANIC on the keypad).
The same Panic Mode keypad sequence may be used to stop Panic
Mode at any time.
NOTE: When using the 103T as a stand-alone starter kill, the optional
horn honk feature must be installed in order for Panic Mode to work.

Valet Mode

Valet ® Mode prevents the system from arming and triggering. This
feature is useful when washing or servicing your vehicle.
To activate Valet Mode:
1. Make sure that the system is disarmed.
2. Press .
3. Press (labeled VALET on the keypad). The system has
now entered Valet Mode.
The same Valet Mode keypad sequence is used to deactivate Valet Mode.
NOTE: If an incorrect sequence of buttons is pressed while attempting to
exit Valet Mode, the system will ignore any new attempts to exit Valet
Mode for 5 seconds.
2000 Directed Electronics, Inc.
©
7