Packing Contents; Tools Needed - Ryobi RLT-310 Owner's Operating Manual

CAUTION. This packaging contains
sharp objects. Take care when
unpacking. Remove the machine,
together with the accessories supplied, from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all the
accessories listed in this manual. Also make sure
that all the accessories are complete.

PACKING CONTENTS

• Cutting head assembly
• Middle shaft assembly
• Upper shaft assembly
• Grass deflector
• 4 screws
• Operator's manual.
WARNING. If any parts are damaged or
missing, do not operate this product until
the parts are replaced. Use of this
product with damaged or missing parts
could result in serious personal injury.
WARNING. Do not connect to power
supply until assembly is complete.
Failure to comply could result in
accidental starting and possible serious
personal injury.
WARNING. Do not attempt to modify this
product or create accessories not
recommended for use with this product.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
personal injury.

TOOLS NEEDED

The following tools (not included) are needed for
assembly: Phillips Screwdriver
ASSEMBLING THE SHAFT
Slide the middle shaft assembly into the cutting
head assembly, Fig.1. Using the screws provided
secure the cutting head to the middle shaft, Fig.2.
Slide the upper shaft assembly into the middle
shaft assembly, Fig.3. Using the screws provided
secure the cutting head to the middle shaft.
UNPACKING
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer. Do not throw
the packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to
the risk of suffocation.
ASSEMBLY
7
Fig. 1
Fig. 2
Fig. 3