Using The Grass Trimmer; Electrical Safety - Ryobi RLT-310 Owner's Operating Manual

Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and /or explosive substances such as liquid, gases
and powders.
Always stop the trimmer and switch off at the mains
when cutting is delayed or when walking from one
cutting location to another.
Do not cross roads or gravel paths with tool still
running.
After use, disconnect the tool from the power
supply and check for damage. If you have the
slightest doubts, check with the authorised service
centre.
Only use the tool according to the instructions
given in this manual.
Do not extend the trimming line beyond the guard
and do not operate the trimmer without both lines
extended and proper line installed.
Check regularly that the nuts, bolts and screws are
tight.

USING THE GRASS TRIMMER

When using the tool, always use caution and take
on a firm and well-balanced position.
Where possible, avoid working on wet, slippery
ground or in any case on uneven or steep ground
that does not guarantee stability for the operator.
Never run, but walk carefully paying attention to the
lay of the land and any eventual obstacles.
Assess the potential risks of the ground to be
mown and take all necessary precautions to ensure
your own safety, especially on slopes or on bumpy,
slippery or unstable ground.
Do not use the tool if you are unable to hold it with
both hands or keep it steady on your legs while
working.
Never allow children or persons unfamiliar with
these instructions to use the tool. Local regulations
can restrict the age of the user.
The tool must never be used by more than one
person.
Never use the tool:
When people, especially children or pets are in the
vicinity.
IMPORTANT SAFETY INSTRUCTIONS
If the user is tired or unwell, or has taken medicine,
drugs alcohol or any substances which may slow
his reflexes and compromise his judgement;
If the guards are damaged or have been removed.

ELECTRICAL SAFETY

CAUTION! The following states how damage to the
grass trimmer and possible injury to people can be
avoided:
Handle the unit with care. Clean the ventilation
slots regularly, follow the maintenance instructions.
Do not overload your device. Work only within the
indicated range of performance. Do not use low
power machines for heavy duty work. Do not use
your device for purposes for which it has not been
designed.
Do not attempt to repair the machine yourself
unless you are qualified to do so. Any work not
specified in this manual may only be carried out by
a qualified service centre.
Only use extension cables that have been
approved for outdoor use and are resistant to
splash water. The core diameter for extension
cables measuring up to 25m must be at least 1.5
mm , and 2.5 mm
2 2
Always roll the whole cable off the reel before use.
Check the cable for damage.
The supply voltage must correspond to the voltage
specified on the modelplate.
Do not abuse the cable. Never move the unit by the
cable or pull the cable to disconnect it from the
mains socket. Keep the cable away from heat, oil
and sharp edges. Ensure that the cable is arranged
so that it cannot be tripped over, stepped on or
have heavy weights rested on it. Make sure the
cable will not be subjected to any damage.
Do not use the machine if the cables are damaged
or worn.
Do not connect a damaged cable to the mains
supply or touch a damaged cable before it is
disconnected from the mains supply. A damaged
cable can lead to an electric shock.
3
for cables longer than 25m.