Water Connection; Information On The Fresh Water Connection - Miele KF 2801 SF Operating And Installation Instructions

Information on the fresh water
connection
The machine may only be connected
to the fresh water supply by qualified
technicians.
Disconnect the machine from the
power supply before connecting it to
the fresh water supply.
Turn off the water supply before con-
necting the water supply line for the
ice cube maker.
The water quality must comply with
the requirements for drinking water in
the country in which the machine is
being operated.
WARNING! Connect to potable water
supply only.
Connection to the household water
supply must comply with the appli-
cable regulations in the country in
which the machine is being installed.
All units and systems used to supply
water to the machine must also com-
ply with the applicable regulations in
the respective country.
The appliance is only suitable for
connection to a cold water line,
which
– is directly connected to the water
supply in order to ensure that water is
circulated in the cold water line.

Water connection

Avoid connection to a water supply
in which the water might stagnate.
This can affect the taste of water and
ice cubes.
– withstands the operating pressure.
– fulfills the hygiene regulations.
The water pressure must be between
29 and 116 psi (2 and 8 bar).
A shut-off valve must be provided be-
tween the water line and the water sup-
ply of the building to ensure that the
water supply can be cut off if neces-
sary.
Make sure that the shut-off valve is
still accessible after the appliance
has been installed.

Risk of damage!
If the water intake is blocked while
the Ice Maker is still in use, the water
intake pipe can freeze up.
Turn the Ice Maker off if the water in-
take is interrupted (e.g., while on va-
cation).
Unduly high water pressure in the
system can result in damage to the
appliance.
Install a pressure reducing valve if
the water pressure in the system ex-
ceeds 116 psi (8 bar).
Do not install the system if the water
pressure exceeds 120 psi (8.3 bar).
Contact your plumbing specialist if
you are unsure of your water pres-
sure.
43