Table of Contents
Advertisement
Setting the signal
en
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Turn the programme selector to Off.
2.
Appliance is switched off.
Turn off the tap.
3.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the washing machine door
and detergent drawer open so
that any residual water can dry
away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance
on and wait for the unlocking
device.
– If at the end of the programme
the display has gone out, the
energy saving mode is active. To
activate, select any button.
36
M
Setting the signal
Y ou can change the following settings:
S e t t i n g t h e s i g n a l
The volume for the information
■
signals (e.g. at the end of the
program) and/or
The volume of the audible button
■
signals.
You will need to activate the setting
mode in order to change these settings.
1/2/3/...
positions on the program
selector
Activate setting mode:
Set the program selector to
1.
position 1. The washing machine is
switched on.
Press the A Start/Reload button
2.
and, at the same time, turn the
program selector clockwise to
position 2.Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the program).
Advertisement
Table of Contents
