Table of Contents
Advertisement
Adding/removing laundry
Following the start of the program, you
can add or remove laundry as required.
Press the A Start/Reload button to do
this.
The A Start/Reload button indicator
lamp flashes and the machine checks
whether it is possible to add laundry.
If the following appears in the display
panel:
The Õ symbol disappears: adding
■
laundry is possible.
The Õ symbol lights up: it is not
■
possible to add laundry.
To continue the program, press the
button A Start/Reload. The program
continues automatically.
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
The load display is not active during
■
reloading.
Changing the programme
Press the A Start/Reload button.
1.
Select another program.
2.
Press the A Start/Reload
3.
button.The new program starts from
the beginning.
Operating the appliance
Cancel the programme
For programs at high temperature:
Press the A Start/Reload button.
1.
To cool down laundry: Select à
2.
Rinse.
Press the A Start/Reload button.
3.
For programs at low temperature:
Press the A Start/Reload button.
1.
Select 0 Spin.
2.
Press the A Start/Reload button.
3.
Programme end during rinse
hold
- - - - 0 appears in the display panel
and the indicator lamp of the A Start/
Reload button flashes.
Continue the program by:
Pressing the A Start/Reload button
■
(the laundry will be drained with the
default spin speed setting*) or
Selecting a spin speed or set the
■
program selector to 0 Spin and then
pressing the A Start/Reload button.
* depending on the chosen program ->
Overview of programmes
Programme end
End appears in the display panel and
the indicator lamp of the A Start/
Reload button is off.
en
35
Advertisement
Table of Contents
