Getting to know the appliance
en
Display panel
In the table you can find possible settings and information in the display panel; these
differ depending on the model.
Settings for the selected programme
Temperature in °C
— - 90*
- - - -, 0 - 1400*
Spin speed in rpm
(revolutions per minute)
1:30
Programme length
1 - 24
Finish in h (hours)
10 kg
Load in kg
* Depending on the model
Status indicators for the programme progress (programme sequence)
N, à, 0, End
Childproof lock
E
Door lock
Õ
Tap
r
Overdosage
Å
- - - - é*
* Depending on the model
22
Temperature
Maximum spin speed or - - - - (Rinse stop = no final drain,
washing remains in the water after the last rinse)
Depends on the programme selection in h: min
(hours: minutes)
End of programme after ... Hours
Maximum load
Wash, rinse, spin/drain, programme end.
Lights up: The childproof lock is activated.
Flashes: The childproof lock is activated, and if the
programme selector has been adjusted or the buttons have
been pressed.
Lights up: When the door can not be opened.
Lights up: Water pressure is too low. This extends the
programme duration.
Flashes: The tap has not been turned on or there is no water
supply.
On if too much foam detected, one additional rinse cycle
switched on.
Power consumption.