Back-Panel Connectors; Com1 Port Connector; Vga Port Connector; Usb0/1 Port Connectors - Shuttle FB62 Manual

F

Back-Panel Connectors

COM1 Port Connector

B1
This mainboard can accommodate two
serial device on COM1.
Attach a serial device cable to the DB9
serial port COM1 at the back-panel of
your computer.
B2 VGA Connector
One 15-pin VGA connector is located at
the rear panel of the mainboard.
B3

10/100 base-T LAN Port Connector

This mainboard can accommodate one
device on LAN. Attach a CAT-5 cable to
the LAN port at the back-panel of your
computer.
USB Port 0/1 Connectors
B4
Two female connectors USB0/USB1 share
the same USB(Universal Serial Bus)
bracket at the rear panel of your
mainboard. Plug each USB device jack
into an available USB0/USB1 connector.
10/100 base-T LAN Port Connector
B5
This mainboard can accommodate one
device on LAN. Attach a CAT-5 cable to
the LAN port at the back-panel of your
computer.
USB Port 2/3 Connectors
B6
Two female connectors USB2/USB3 share
the same USB(Universal Serial Bus)
bracket at the rear panel of your
mainboard. Plug each USB device jack
into an available USB2/USB3 connector.
COM1 Port
VGA Port
USB Port 0/1
- 29 -
LAN Port
LAN Port
USB Port 2/3