Boot - MSI MS-S0361 Manual

▍ ▍
BIOS Setup BIOS Setup

Boot

▶
Bootup NumLock State
Ths settng s to set the Num Lock status when the system s powered on. Settng to
[On] wll turn on the Num Lock key when the system s powered on. Settng to [Off] wll
allow users to use the arrow keys on the numerc keypad.
▶
Quiet Boot
Ths BIOS feature determnes f the BIOS should hde the normal POST messages wth
the motherboard or system manufacturer's full-screen logo.
When t s enabled, the BIOS wll dsplay the full-screen logo durng the boot-up se-
quence, hdng normal POST messages.
When t s dsabled, the BIOS wll dsplay the normal POST messages, nstead of the
full-screen logo.
Please note that enablng ths BIOS feature often adds 2-3 seconds of delay to the
booting sequence. This delay ensures that the logo is displayed for a sufficient amount
of tme. Therefore, t s recommended that you dsable ths BIOS feature for a faster
boot-up tme.
▶
CSM16 Module Version
Ths tem show the CSM16 module verson.
▶
Option ROM Messages
Ths tem s used to determne the dsplay mode when an optonal ROM s ntalzed
durng POST. When set to [Force BIOS], the dsplay mode used by AMI BIOS s used.
Select [Keep Current] f you want to use the dsplay mode of optonal ROM.
3-16