D-Link DWL-8200AP Manual page 83

DWL-8200AP User's Manual
Device Configuration > Multi-SSID
Enable Multi-SSID:
Ethernet:
MSSID Index:
D-Link Systems, Inc.
When Multi-SSID is enabled, you can configure your SSIDs for either
both, 11a only, or 11g only networks.
Select "Main" if you wish to configure the network on LAN 1 (PoE).
Select "Guest" to set up the network on LAN 2.
You can select up to 7 MSSIDs per band, the default MSSID is the
primary, which puts the total to 8 MSSIDs per band.
SSID: Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default
setting is default. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Band:
Select the wireless band (IEEE802.11a or IEEE802.11g).
Using the AP Manager
83