D-Link DWL-8200AP Manual page 80

DWL-8200AP User's Manual
Device Configuration > DHCP Server
DHCP Server:
Dynamic Pool
Settings:
Static Pool
Settings:
IP Assigned From:
Range of Pool
(1~255):
SubMask:
Gateway:
D-Link Systems, Inc.
Enable or disable the DHCP server function.
Click to enable Dynamic Pool Settings. Configure the IP address
pool in the fields below.
Click to enable Static Pool Settings. Use this function to assign the
same IP address to a device at every restart. The IP addresses
assigned in the Static Pool list must NOT be in the same IP range
as the Dynamic Pool.
Enter the initial IP address to be assigned by the DHCP server.
Enter the number of allocated IP addresses.
Enter the subnet mask.
Enter the gateway IP address, typically a router.
Using the AP Manager
80