D-Link DWL-8200AP Manual page 75

DWL-8200AP User's Manual
Device Configuration > Filters
Internal Station
Connection:
Ethernet to WLAN
Access Control:
Access Control
D-Link Systems, Inc.
Enabling this allows wireless clients to communicate with each other.
When this option is disabled, wireless stations are not allowed to
exchange data through the access point.
Enabling this option allows Ethernet devices to communicate with
Access:
wireless clients. When this option is disabled, all data from Ethernet
to wireless clients is blocked. Wireless devices can still send data to
the Ethernet devices when this is disabled.
When disabled access control is not filtered based on the MAC
address. If Accept or Reject is selected, then a box appears for
entering MAC addresses. When Accept is selected, only devices
with a MAC address in the list are granted access. When Reject
is selected, devices in the list of MAC addresses are not granted
access.
Add or Delete MAC addresses in the Access Control List.
List:
Using the AP Manager
75