D-Link DWL-8200AP Manual page 52

DWL-8200AP User's Manual
Tools > Misc > Telnet Settings
Telnet is a program that allows you to control your device from a single PC.
Console Protocol:
Timeout:
Note: SNMP is disabled by default.
D-Link Systems, Inc.
Status:
Check Enabled to support Telnet or SSH.
Select either Telnet or SSH. Telnet is enabled by default.
Select a time period after which a session timeout will occur. Your
choices are 1 minute, 3 minutes, 5 minutes, 10 minutes, 15
minutes, or Never.
Status: Check Enabled to support SNMP.
Using the Configuration Menu
52