D-Link DWL-8200AP Manual page 65

DWL-8200AP User's Manual
Device Configuration > Wireless
IEEE 802.11a:
Wireless:
Channel:
SSID Broadcast:
Super A:
D-Link Systems, Inc.
Check to enable wireless mode.
SSID:
The Service Set (network) Identifier of your wireless network.
Allows you to select a channel. 52 is the default setting for 802.11a.
Allows you to enable or disable the broadcasting of the SSID to
network clients.
Select this option to enable a wireless signal rate of up to 108Mbps.
Super A is a group of performance enhancement features that
increase end user application throughput in an 802.11a network.
Super A is backwards compatible with standard 802.11a devices.
For ideal performance, all wireless devices on the network should
be Super A capable.
Using the AP Manager
65