IP Address Configuration
To connect to the network, make sure the
proper network settings are configured for
the DWL-AB520.
For
Microsoft Windows XP:
Go to Start > right click on
Places
> select Properties > Double-click
on the
Network Connection
with the DWL-AB520.
Select
Internet Protocol (TCP/IP)
Select
Obtain an IP address
automatically
Router or Access Point has DHCP
server enabled).
Select
address automatically.
Static IP address setup
Select
Use the following IP
address
(if the Wireless Router or
Access Point does not have a
DHCP server enabled).
IP address:
Subnet mask:
Input a static IP address in the same range
as the Wireless Router or Access Point
Your Internet Service Provider (ISP)
provides preferred DNS server information
My Network
associated
Click
Properties
(if the Wireless
Obtain DNS server
Click
OK
192.168.0.51
255.255.255.0
Click
OK