Windows 2000 Users - D-Link AirPro DWL-AB520 Quick Installation Manual

For

Windows 2000 users:

Go to Start > Settings >
Connections > Double-click on the the
Area Connection associated with the DWL-
AB520 > select Properties.
Click Internet Protocol (TCP/IP)
Setup for wireless router or Access
Point using DHCP server.
Select Obtain an IP address
automatically
Router or Access Point has DHCP
server enabled).
Select
address automatically.
Static IP address setup
Select Use the following IP
address (if the Wireless Router or
Access Point does not have a
DHCP server enabled).
IP address:
Subnet mask:
Input a static IP address in the same range
as the Wireless Router or Access Point
Your Internet Service Provider (ISP)
provides preferred DNS server information
Network and Dial-up
Local
Click Properties
(if the Wireless
Obtain DNS server
Click OK
192.168.0.51
255.255.255.0
Click OK