Ip Address Configuration - D-Link DWL-520 Quick Installation Manual

2.4ghz wireless pci adapter
Hide thumbs Also See for DWL-520:
Table of Contents

Advertisement

IP Address Configuration

To connect to a network, make sure
the proper network settings are
configured for DWL-520.
For
Microsoft Windows XP:
Go to Start > right click on
My Network Places
>
select Properties > Double-click on
the Network Connection associated
with the DWL-520.
Click
Internet Protocol (TCP/IP)
Click
Properties
Dynamic IP address setup
Used when a
DHCP server
the local network. (i.e. Router)
Select
Obtain an IP address
automatically
(if the Wireless
Router or Access Point has DHCP
server enabled)
Select
Obtain DNS server
address automatically
Click
OK
Static IP address setup
Used when a
DHCP server
on the local network.
Select
Use the following IP address
IP address:
192.168.0.52
Subnet mask:
255.255.255.0
Input a static IP address in the same
range as the Wireless Router or
Access Point.
Click
OK
is available on
is not available

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents