The Sewing Operation - Mitsubishi PLK-E0504 Technical Manual

Caution
★ Depending on the shape of the work
holder, the collision may be happened
with the work holder (NO.5) and the
presser foot (NO.6) while the work
holder is on the way back to the home
position. For avoidance of this accident,
before starting the sewing operation,
program the work holder returning home
with the operation panel of the control
box to trace the sewing pattern.
For this setting, refer to the [Wiper
Setting] in the [PROGRAM MODE] on
the operation panel.

6-2. The sewing operation

Caution
It is very dangerous to operate the sewing machine without the safety guards (Eye guard,
Belt cover, Finger guard etc.).
Please make sure to always operate the sewing machine with the safety guards.
★ Please do not put unnecessary articles except for the sewing operation on the tabletop.
★ Please keep the hands and the face away from the needle.
(1) Turn the power switch (NO.1) ON.
NOTE The collision may be happened with the work holder and the presser foot
depending on the work holder shape when the work holder is moved to original
position.
a) Press the
Press the
b) Press the
c) And then press the [HPF] key and select the [ON] key.
(2) Program or select the required sewing pattern by selecting following icon.
Programming ----------
Selecting pattern ------
The sewing pattern programming or selecting can be performed with the operation panel.
For the details, please refer to the instructions on the technical manual Operation Panel .
(3) Set the sewing speed by selecting
key at the normal mode condition, then MENU MODE is appeared.
key.
key.
>>
>>
－16－
6
5
or icon.