Advertisement
2.5" SSD/HDD Enclosure SATA 3 ─ USB 3.0
Manual
DA-71105
Introduction
Congratulations on your purchase of this Portable USB3.0 Hard Drive Enclosure. It's a
great way of making a lightweight, portable mass storage device with an unused
internal hard drive that will be detected and installed automatically by your
computer when it connected. Depending on the capacity of the drive used,
you can keep large files, or run programs and play videos directly. It can also be used
as a backup drive to your computer or other devices.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digitus DA-71105
Summary of Contents for Digitus DA-71105
- Page 1 2.5" SSD/HDD Enclosure SATA 3 ─ USB 3.0 Manual DA-71105 Introduction Congratulations on your purchase of this Portable USB3.0 Hard Drive Enclosure. It's a great way of making a lightweight, portable mass storage device with an unused internal hard drive that will be detected and installed automatically by your computer when it connected.
- Page 2 Specification Transfer interface USB3.0 Transfer rate 5Gbps (MAX) Support HDD 2.5"/3.5" Hard disk Work temperature -40~65 °C Work humidity 8%~90% Storage humidity 5%~95% Operate system Windows 2000/XP/VISTA/WIN7/8/10 System Requirements Hardware: computer should have USB port Software: Windows 2000/XP/VISTA/WIN7/8/10 Note: Windows98 have to install CD Driver (use the CD Driver in accessories to install) Installation Installation of Windows SE/ME/2000/XP/VISTA/WIN7/8/10...
- Page 3 Installation of Hard Drive 1. Open the enclosure 2. Place hard drive into the enclosure 3. Connect included IDE or SATA cable to hard drive 4. Tighten screws on the enclosure to hold the hard drive in place 5. Screw the enclosure back together 6.
Need help?
Do you have a question about the DA-71105 and is the answer not in the manual?
Questions and answers