Table of Contents
Advertisement
Cleaning function
Caution
Setting procedure
When the oven has cooled
3. Half close the oven door.
With both hands, grip the door on the left and
right hand sides.
Close the door a little more and pull it out.
After cleaning, refit the oven door in the reverse order
to removal.
The cleaning function is a regeneration program. If the
self cleaning components of the oven are no longer
cleaning themselves sufficiently, they can be
regenerated using this function. They are then fully
operational again.
Before you do this, you must clean the oven surfaces
which are not self cleaning. Otherwise stains may
appear that cannot be removed.
1.
Set the function selector to hot air á.
2.
Set the temperature selector to
3.
Press the
clean
CL appears in the display.
The oven will switch off automatically after one hour. A
signal will sound and CL will flash in the display.
Switch off the function selector and the temperature
selector.
Wipe away salt residues from the self cleaning
components using a moist cloth.
button.
.
clean
27
Advertisement
Table of Contents
