Using The Hob; Setting Procedure - Bosch HLN 343250 B Instruction Manual

Using the hob

Setting procedure

Dual circuit hotplate
Note
16
Adjust the heat setting of the individual hotplates
using the hotplate controls.
0 = Hotplate off
1 = Lowest heat setting
9 = Highest heat setting
The indicator light lights up when a hotplate is on.
The size of this hotplate can be altered.
Switching on the large hotplate:
Turn the hotplate control to level 9 where you will feel
a slight resistance then continue turning to symbol
l = large dual circuit hotplate
Then immediately turn it back to the desired heat
setting.
Switching back to the small area:
Turn the hotplate control to 0 and reset.
Caution: do not turn the control beyond symbol l
to 0.
The small dual circuit hotplate is particularly good for
heating small amounts.