Advertisement
Available languages
Available languages
ѥ
WARNING: To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any maintenance.
ѥ
WARNING: Always wear safety goggles or safety glasses with side shields
when using compressed air to clean the tool. If the operation is dusty, also wear
a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
ѥ
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
ѥ
WARNING: When servicing, use only identical Craftsman replacement parts.
Use of any other parts may create a hazard or cause product damage. To
ensure safety and reliability, all repairs should be performed by a qualified
service technician.
CHUCK REMOVAL
(Figs. 14. 15 and 16)
The chuck can be removed and
replaced with a new one.
1.
Remove the battery and
lock the trigger switch on
the drill/driver by placing the
direction-of-rotation selector
in the center position.
2.
Open the chuck jaws.
3.
Insert a 5/16 in. or larger hex
key (available separately) into
the chuck of the drill/driver
and securely tighten the
chuck jaws onto the hex key.
4.
Tap the hex key sharply with
a mallet (available separately)
in a clockwise direction. This
will loosen the screw in the
chuck for easy removal.
MAINTENANCE
Fig. 14
Chuck Jaws
Mallet
Fig. 15
Philips screwdriver
19
Keyless Chuck
Hex Key
Advertisement
