U-Line UANB115 User Manual & Service Manual page 36

USER GUIDE
11. Use screwdriver to orient auger shaft to align with
motor shaft keyway
12. Install key into keyway
12
11
13. Install spacer, ensure that key is captured in slot
13
14. Insert screwdriver into groove of auger shaft and pry
shaft outwards
15. Insert retainer into groove, ensure that retainer is
aligned with hole in spacer.
14
Reference Diagrams
15
16. Install screw and tighten
17. Plug in gear motor
• BLUE to BLUE
• BLACK to BLACK
• WHITE to WHITE
• Connect ground wire with ground screwemove
36
u-line.com