Table of Contents
Advertisement
On Screen Display Operation
CHANGE PASSWORD
The Change Password function allows the user to change the password used
to access all connected PC systems. The default password is 8 digits,
"00000000".
The Enter Password window appears when you select this item and press
enter. The maximum password is eight digits. After you key in the password
and press the Enter key, another window appears to conform your typed pass-
word.
You must retype the new password to confirm the password change. The
following window appears to confirm the completion of your password change.
CONSOLE ON/OFF
The Console On/Off function lets you select the console access of the KVM
switch. If you select "CONSOLE ON", any sure can use the console. If you
select "CONSOLE OFF" (factory default is OFF state), a password must be
entered to use the console. When you enter the password and pass the KVM
switch authentication, the console will be set to ON. After you finish using the
KVM switch, remember to set the CONSOLE On state to OFF to ensure pass-
word authentication.
Note: If you reset the KVM switch, or there is a power failure, the CON-
SOLE will be set to the OFF state.
(Continued)
19
Hide quick links:
Advertisement
Table of Contents
