D-Link DKVM-16 User Manual page 15

Using the DKVM-16
Hot Key Commands
Scroll
Lock
Note:
1. If you have already set up the scan mode command, DKVM-16 will issue
one beep to confirm each hop from one PC port to the next.
2. To exit Auto Scan Mode, press any key or the SPACE bar.
Scroll
Lock
This screen will appear on your monitor
Note: The Rom reflash command will take approximately 1-2 minutes.
Scroll
Lock
This screen will appear on your monitor
Note: The Search PC name command starts with the 1st PC port.
Scroll
Lock
(Continued)
Scroll
+ +
Lock
Scroll
+ +
Lock
Scroll
+ +
Lock
Scroll
+ +
Lock
(Continued)
Auto Scan
=
S
OSD default
R =
Search PC name
=
F
= On Screen Display Manual
Space Bar
15