McGREGOR MET2523 Original Instruction Manual page 6

Safety information
Important - Please read these instructions fully before starting assembly
Operational safety (continued)
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the machine
if the cord is damaged or worn.
b) keep extension cords away from moving hazardous
parts to avoid damages to the cords which can lead to
contact with live parts.
c) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
d) Never operate the machine while people, especially
children, or pets are nearby.
3. Operation
a) Keep supply and extension cords away from cutting
means.
b) Wear eye protection, long trousers and stout shoes at all
times while operating the machine.
c) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or
shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are
away from the cutting means.
g) Always disconnect the machine from the power supply
(e.g. remove the plug from the mains)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the
cutting means.
i) Always ensure that the ventilation openings are kept clear
6
Customer helpline 0345 605 2065